Impact protection vehicle for Priority TM

Published:  14 August, 2019

Traffic management specialist Priority TM has acquired its latest impact protection vehicle from Bevan Group.

Fitted with a crash cushion and high-visibility light arrow board built by Highway Care, the new truck is purpose-designed for operation in and around the City of London.

Crucially, at just 4.5 metres in length, its body is 2.2 metres shorter than that of a conventional impact protection vehicle. This feature, which enhances agility and manoeuvrability, had earned the truck its ‘Stubby’ nickname long before it entered service.

Priority TM offers service covering a broad range of traffic management schemes, from basic temporary traffic light systems, minor road closures and diversions, to multi-head, multi-phased temporary traffic light systems and major lane closures on some of the UK’s busiest and most congested roads.

The company’s headquarters are in Chelmsford, but the new truck operates primarily from its depot in Greenwich, on the south bank of the Thames. Early assignments have entailed night-time closures to traffic so routine maintenance can be carried out on Tower Bridge.

The 18-tonne Iveco Eurocargo chassis is powered by a 250 hp six-cylinder Euro VI engine, and compliant with London’s Ultra Low Emissions Zone regulations. Bevan Group fitted beacon bars and a comprehensive armoury of 4G recordable and downloadable safety cameras, including two to assist the driver when reversing – one is activated when the crash cushion is raised, the other when deployed.

Engineered to an exceptionally high standard, the truck’s body incorporates wells from which Priority TM’s operatives are able to drop traffic cones safely and rapidly when implementing a closure. Bevan Group also added some two tonnes of steel ballast beneath the bed, to ensure the truck achieved the minimum 10-tonne gross weight required for an impact protection vehicle.

Meanwhile, Highway Care’s heavy-duty Safe Stop 90 crash cushion absorbs rear-end impacts at speeds of up to 68 mph (110 kph compliant to TD49/07) and can be deployed at a travelling speed of up to 55 mph. Potentially reusable, it boasts a galvanised external safety frame that offers protection against the low-speed ‘nuisance’ impacts – incurred, for example, when a vehicle is manoeuvring in a yard – which is a common cause of damage to crash cushions.

The new truck is delivering cost and efficiency benefits for Priority TM, because for certain assignments it was previously using two vehicles to undertake the same work – one, usually a 7.2-tonner, but sometimes a van-based 3.5-tonner, carried the cones, while a ballasted truck with crash cushion travelled behind to ensure the safety of the operator’s crew.

Priority TM Managing Director Duncan Crome explained: ‘Dual working remains the best practice in some circumstances. But its flexibility means the new vehicle can be used to undertake other jobs on a solo basis, without the need for a second. So of course, it has the potential to save us money.’

He continued: ‘Our new impact protection vehicle is not intended for operation on motorways or major trunk road schemes. Rather, its main role is as back-up for utilities work. We do not need a full-sized wagon that is 10 metres long and capable of carrying upwards of 200 cones. It made sense to restrict its length because if you try to drive a truck like that through central London you are going to run into difficulties quickly.

‘At eight metres, the truck is still long enough to give us a decent-sized bed and cone wells from which to work. But it also makes it a lot easier to negotiate the traffic and narrow lanes within which we have to work.’

Priority TM is a long-standing customer of Highway Care but had not worked previously with Bevan Group. ‘I’ve been pleased and impressed with the way both companies have supported us,’ continued Duncan.

‘I liked Bevan Group’s consultative approach to the design phase. Sales Director Roy Shelton and his team demonstrated reassuring attention to detail and were prepared to consider any requests – if they could not accommodate us, they would invariably come back with an alternative suggestion.

‘The truck is clearly very well built, which is encouraging given that we anticipate running it for at least 10 years, while round-the-clock breakdown cover by Bevan Group’s Aftercare Response provides added peace of mind. I took on this business in 2006 and have dealt with a variety of bodybuilders over the years, but I’d have no hesitation in describing Bevan Group as the best yet.’

The first impact protection vehicles to be built by Bevan Group and fitted with Highway Care’s safety technology entered service this year.

Related Articles

  • City of London adopts fully electric RCV fleet 

    The City of London Corporation has awarded a new waste collection, street cleansing and ancillary services contract to Veolia – with services that began on 6 April.

  • First all-electric RCV starts City of London trial 

    The UK’s first fully-electric refuse collection vehicle (RCV) has started a two-month trial in the City of London.

  • Future Fleet Forum 2018: responsible procurement strategies, by Christopher Bell, City of London 

    Putting an innovation culture into action, Christopher Bell, commercial director for City of London, told delegates how he transformed a poorly performing procurement operation and successfully implemented a responsible procurement strategy. ‘We wanted to change the game. Innovation was key, and we had big ideas to take things forward quickly.’

  • Bespoke impact vehicles 

    The Black Bourton, an Oxfordshire-based operator has commissioned a fleet of 10, highly bespoke impact protection vehicles (IPVs) built by the Bevan Group and fitted with crash cushions and high-visibility light arrows by Highway Care.

  • Rotherham Council wins award with help from Multihog 

    Rotherham Metropolitan Borough Council and their Multihog have gained national recognition in delivering best practice at the Association for Public Service Excellence's annual awards ceremony in Liverpool.

Sign Up

For the latest news and updates from LAPV.






Linkedin

LAPV (Local Authority Plant and Vehicles) is the only UK information source purely dedicated to local authority vehicles and affiliated plant equipment. Appearing four times a year, it offers well-researched technical articles on the latest equipment/technology as well as in-depth interviews with key industry professionals. More...

Facebook

Twitter


All content © Hemming Information Services 2019

Sitemap